Premium video tutorials
Learn at your own pace
Mobile (learn on-the-go)
Unlimited tests and quizzes
Regularly updated content
This course is part of our Lean Six Sigma Black Belt program, which consists of eight courses designed to prepare you for the International Association of Six Sigma Certification (IASSC) Black Belt exam. We recommend you take all eight courses in the program to be fully prepared for the exam.
What you will learn
In this Design of Experiments online course, you will learn the Design of Experiments or DOE. This design technique, which can be applied in several different methods, takes the results from a few carefully designed experiments and uses those results to create equations that explain how the product, process or system works.
By the end of the course, you will know what the keys to a successful DOE analysis are, and you will be able to conduct a Full Factorial DOE and a Fractional Factorial DOE. If you are a member or leader of an analysis team using a methodology such as Lean Six Sigma, this technique will be a significant aid when your problem resolution requires a major change to your systems.
In addition to covering experimental design approaches and methodologies, you will learn to use popular statistical analysis application Minitab to conduct your DOE and apply your results.
The design of experiments technique is incredibly powerful when working with new products, new technologies, or when migrating an existing technology into a new application. It is also very helpful for identifying the critical few parameters that will drive the performance of the product, process, or system. When you are in a discovery mode of analysis, this technique provides a path to important insights.
Who this Design of Experiments online course is for
This course can be taken as part of the GoSkills Lean Six Sigma Black Belt training program, to prepare for certification with IASSC. It is also a good stand-alone course to improve proficiency and expand your skill set in any industry with responsibility for technology deployment or product and process development.
This course will be from the standpoint of helping you to make wise decisions about your product and process design and management, not conducting mathematical proofs or solving complex matrix mathematics.
- 24 practical tutorials with videos, reference guides, exercises and quizzes.
- Designed to prepare you in part for the IASSC Black Belt exam. To prepare in full, you should take all eight courses in our Lean Six Sigma Black Belt program.
- Identify when and why to do a DoE, and recognize the steps of the process.
- Understand the difference between the full factorial approach and fractional factorial approaches, and their pros and cons.
- Recognize when to use a Plackett-Burman and Taguchi DoE and how to design these types of study.
- Learn how to conduct DoE analysis in popular statistical analysis program, Minitab.
- Understand how design and problem solving teams can apply DOE results to make wise decisions.
- Master the key principles for success when conducting a DOE study.
- Gain critical skills for your role in technology deployment, product and process development, or Lean Six Sigma team.
- Earn 7 PDUs or contact hours toward your Project Management education for certification with PMI.
Once enrolled, our friendly support team and tutors are here to help with any course related inquiries.
Estimated study time
13h for all materials
Accreditations and approvals
Experimental Design Approaches
Experiments and DesignThe design process typically relies on experiments to create and analyze data that is used when making design decisions. This data is invaluable to the design team as they strive to create a superior design. There are several approaches to the experimental process that design teams use.
Trial and ErrorThe simplest experimental design approach is trial and error. If subject matters experts are generating the trial design, this can be successful. However, if the trial fails, this approach can lead to delays and overruns.
One Factor At A TimeThe OFAAT method is often considered the best scientific method for creating a plan of experiments. It is very controlled, and the design performance often grows in capability over time. But it is also the most timing consuming and expensive approach when conducting a set of experiments.
Full Factorial Design of ExperimentsA full factorial DOE conducts a set of experiments with carefully controlled configurations of the independent or control factors in the design. The results are statistically analyzed to create a design space equation that can be used to optimize the design. It is faster and cheaper than OFAAT, but longer and more costly than a lucky guess with Trial and Error.
Fractional Factorial Design of ExperimentsA fractional factorial DOE conducts only a fraction of the experiments done with the full factorial DOE. It then statistically analyzes the results to fine tune the design and normally does a second optimizing study. Even though there are typically several sets of experiments, the total is still less than the number conducted with a full factorial study and much less than OFAAT.
Theory of Design of ExperimentsThis lesson provides a high level description of the DOE process that applies to any type of DOE. It also answers the questions of when to do a DOE and why to do a DOE.
DOE StudiesThis lesson explains the preparation needed to initiate a DOE study of any type. It includes a discussion on setting the DOE objective and has a checklist of questions that will need to be answered either before the study starts or early in the study design.
Full Factorial Design of Experiments
Full Factorial DOE MethodologyThis lesson describes the eight steps to be followed when conducting a full factorial DOE.
Factor SelectionThis lesson explains the different types of factors that are involved in the DOE study design including control factors and response factors. The characteristics that should be used when selecting each type of factor are discussed.
Full Factorial DOE Study DesignThis lesson explains how to design the study so that the statistical analysis can be performed. The preparation of the test sample configurations is explained. The use of design features of replication, center points and blocking are also addressed.
Conducting the StudyThis lesson addresses how to execute and control each of the experimental runs in the study. It also explains the importance of the measurement system that is used.
Design Space EquationThe statistical analysis of the full factorial DOE results in the determination of the coefficients for a design space equation that relates all the control factors to the response factors. This equation includes interaction effects between control factors. This equation can then be used by designers to solve for the best overall system performance.
DOE in Minitab
Minitab is the statistical analysis software application that is most often used with Lean Six Sigma projects. Minitab has a Wizard that guides you through the setup and design of a Design of Experiments study. This lesson demonstrates how to use that Wizard.
Fractional Factorial Design of Experiments
Fractional Factorial Pros and ConsThis lesson compares the difference between the full factorial approach and fractional factorial approaches. It explains the pros and cons of using a fractional factorial methodology.
Fractional Factorial DOE MethodologyThis lesson describes the nine steps to be followed when using one of the fractional factorial DOE methods. The emphasis is one how the steps differ from the full factorial DOE methodology.
Confounding EffectsThis lesson explains the importance of designing a fractional factorial DOE study using a set of experiments that is balanced and orthogonal. Otherwise the runs can become confounded and that will invalidate the statistical analysis of the results.
Factor SelectionThis lesson builds on the previous factor selection lesson. However, now it addresses how the factor selection process changes as a fractional factorial DOE progresses through two or three levels of studies.
Plackett-Burman DOEThe Plackett-Burman DOE is a special case fractional factorial DOE. It is used as a screening study when there are a large number of control factors. This lesson explains when to use Plackett-Burman DOE and how to design this type of study.
Taguchi DOEThe Taguchi DOE is a special case fractional factorial DOE. It is used primarily for analyzing manufacturing processes. The Taguchi DOE separates the control factors into two categories and analyzes them with different DOE approaches. This lesson explains the characteristics of this type of study.
Applying DOE Results
DOE Analysis in MinitabThis lesson reviews the different types of graphical and tabular results for a DOE study that are generated by Minitab. Each of these types of results provides a different perspective on the analysis of the design that is being studied.
DOE in Design Creation
The DOE results can be used by design teams to make wise design decisions. This lesson will address how to use the DOE results in predicting system performance, designing system controls and establishing tolerances on system control and response factors.
DOE in Design OptimizationThe DOE results can be used by design teams to improve and optimize an existing design based upon new needs or uses. The structure of the DOE study, particularly the fractional factorial DOE methodologies, allows the design team to easily establish optimal performance in a variety of settings.
DOE in Problem SolvingThe DOE results can be used by problem solving teams, such as Lean Six Sigma project teams, to identify which factors provide the major contribution to the problem or problem performance. It can also be used to explain the expected benefit from implementing different types of solutions.
DOE Keys to Success
This final lesson reviews the key principles that must be followed when conducting a DOE study. It highlights the benefit of each and the dangers if the principle is not properly applied.