Failure Mode and Effects Analysis

Testimonials (110 reviews)

Features

Premium video tutorials

Award-winning instructors

Personalized learning

Get certified

Learn at your own pace

Mobile (learn on-the-go)

Unlimited tests and quizzes

Regularly updated content

Overview

This course is part of our Lean Six Sigma Black Belt program, which consists of eight courses designed to prepare you for the International Association of Six Sigma Certification (IASSC) Black Belt exam. We recommend you take all eight courses in the program to be fully prepared for the exam.

What you will learn

In this online FMEA training course, you will master Failure Mode Effects Analysis, or FMEA, a technical risk analysis tool that both assesses risks of a product or process failure and prioritizes those risks for mitigation.

The Design FMEA focuses on product risk and is best applied when doing that risk assessment during the development process. The Process FMEA is both helpful during the development of the process and with the ongoing management and improvement of the process. Both techniques rely on the participation of a cross-functional team and they provide an objective score to what is often a subjective discussion within an organization.

By the end of the course, you will have learned how to conduct a Failure Mode Effects Analysis. If you are a member or leader of an analysis team using a methodology such as Lean Six Sigma, this analysis will be a significant aid to your problem resolution.

Who this online FMEA training course is for

This course can be taken as part of the GoSkills Lean Six Sigma Black Belt training program, to prepare for certification with IASSC. It is also a good stand-alone course for anyone in an industry where FMEAs are part of normal product and process development.

This course will be from the standpoint of helping you to make wise decisions about your product and process design and management, not conducting mathematical proofs or solving partial differential equations. To assist you with your learning, I will provide templates of typical FMEA forms and spreadsheets.

Highlights:

  • 28 practical tutorials with videos, reference guides, exercises and quizzes.
  • Downloadable FMEA forms, templates, and spreadsheets.
  • Designed to prepare you in part for the IASSC Black Belt exam. To prepare in full, you should take all eight courses in our Lean Six Sigma Black Belt program.
  • Understand the various types of FMEAs used in different business processes.
  • Master the Failure Mode and Effects methodology, including the process, standards, and types of failures.
  • Learn how to conduct a Process FMEA, from preparation, analysis, mapping, failure modes and ratings.
  • Learn how to conduct a Design FMEA, from preparation, analysis, mapping, failure modes and ratings.
  • Gain critical skills for your role in the product and process development industry or Lean Six Sigma team.
  • Earn 4.5 PDUs or contact hours toward your Project Management education for certification with PMI.

Once enrolled, our friendly support team and tutors are here to help with any course related inquiries.

Failure Mode and Effects Analysis
Focus video player for keyboard shortcuts
Auto
  • 720p
  • 540p
  • 360p
1.00x
  • 0.50x
  • 0.75x
  • 1.00x
  • 1.25x
  • 1.50x
  • 1.75x
  • 2.00x
cc

Summary

Skill level: Intermediate
Certificate: Yes
Lessons: 28
Accredited by: CPD
Pre-requisites: None
Video duration: 2h 54m
Estimated study time: 16h for all materials

Accreditations and approvals

CPD - The CPD Certification Service. PMI - Project Management Institute GoSkills Ltd is an IASSC Accredited Training Organization™ Microsoft Partner

GoSkills Ltd is an IASSC Accredited Training Organization™.

Syllabus

1

Product and Process Risk

When risks become reality, there are major impacts both internally and externally. Risk-based design incorporates risk reduction into the design of products and processes. The sooner risks are addressed, the lower the impact of risk reduction.

2

Try it!

Susceptibility, Occurrence, Response Capability

Susceptibility, occurrence, and response capability describe the parameters of risk analysis. All three must combine for a risk to become a reality. Completely controlling anyone of those removes the risk as a factor in your business.

3

Strengths, Weaknesses, Benefits

The Failure Mode and Effects Analysis (FMEA) methodology assesses risks from the standpoint of susceptibility, occurrence, and detection. The methodology has both strengths and weaknesses.

4

Correction and Prevention

Risk response strategy can focus on correction after a risk becomes a reality or prevention to ensure a risk does not become a reality. The FMEA methodology prioritizes risks to determine which risks should be prevented.

5

Types of FMEAs

There are different types of FMEAs for different business applications. The two most commonly used ones are the Design FMEA and the Process FMEA.

6

Design Lifecycle and Problem Solving

The FMEA methodology provides insight for product managers and operations managers at all stages of the product lifecycle. They are a key source of information for problem solving and process improvement.

1

Try it!

FMEA Process

FMEAs are completed using a seven step process. There are minor variations in the process based upon the type of FMEA. The results of the FMEA analysis are recorded on a standard FMEA form.

2

FMEA Team

The FMEA analysis is normally conducted by a cross-functional team. A team of subject matter experts is a critical element of FMEA success.

3

FMEA Standards and Definitions

The FMEA is a widely accepted methodology across many industries. There are several standards that provide guidance on how to determine the FMEA scoring for different types of FMEAs.

4

Types of Failures

There are many types of failures. When conducting an FMEA, all failure types must be considered, not just the most obvious. Each category of failure should be considered for every product component or process step.

5

Failure Mode and Effects Criticality Analysis (FMECA)

The FMECA is a special form of FMEA that accentuates the focus on finding and controlling critical characteristics. It simplifies the FMEA process, but loses fidelity in the analysis.

6

Critical Characteristics

Critical characteristics drive cost and complexity in process operations. Design FMEAs identify critical characteristics. Process FMEAs assess the ability of the organization to control critical characteristics.

1

Design FMEA Preparation

The first three steps of the Design FMEA process set the stage for effective FMEA analysis sessions. Cutting corners on these steps lead to confusion and delays in the analysis.

2

Design FMEA Analysis

The final four steps of the Design FMEA are where the assessment happens. These steps do the original analysis and manage the mitigation of high risk failures.

3

DFMEA Block Diagram

Failures are based upon the product or system's functional design The functional block diagram of the system or product initiates the FMEA analysis.

4

DFMEA Failure Modes

Each of the functions identified in the block diagram are susceptible to failures. These failures are identified and recorded on the FMEA.

5

DFMEA Severity Rating

An effect on the customer or user is determined for each failure mode and listed in the Design FMEA. The severity of that effect is rated to determine the impact.

6

DFMEA Occurrence Rating

Causes for each failure in the Design FMEA are identified. The probability of each of those causes occurring is evaluated and scored.

7

DFMEA Detection Rating

The product design and development process is evaluated to determine if it is able to detect each of the failures listed in the Design FMEA. This detection capability is evaluated and scored.

8

Try it!

DFMEA RPN and Mitigation

The severity, occurrence, and detection ratings are combined to create a Risk Priority Number (RPN). When that RPN exceeds the organization's risk threshold for Design FMEAs, a mitigation strategy is developed and implemented to lower the scores until the RPN is acceptable.

1

Process FMEA Preparation

The first three steps of the Process FMEA process set the stage for effective FMEA analysis sessions. Cutting corners on these steps lead to confusion and delays in the analysis.

2

Process FMEA Analysis

The final four steps of the Process FMEA are where the assessment happens. These steps do the original analysis and manage the mitigation of high risk failures.

3

Process Mapping

Failures are based upon the process steps. A process map identifies all the steps in the process. These steps initiate the Process FMEA.

4

PFMEA Failure Modes

Each of the steps identified in the process map are susceptible to failures. These failures are identified and recorded on the FMEA.

5

PFMEA Severity Rating

An effect on process performance or operator safety is determined for each failure mode and listed in the Process FMEA. The severity of that effect is rated to determine the impact.

6

PFMEA Occurrence Rating

Causes for each failure in the Process FMEA are identified. The probability of each of those causes occurring is evaluated and scored.

7

PFMEA Detection Rating

The process is first assessed to determine if the failure modes identified in the Process FMEA have been prevented based upon the process design or management. The process control plan is then evaluated to determine if it is able to detect each of the failures listed in the Process FMEA. This prevention and detection capability is evaluated and scored.

8

PFMEA RPN Rating and Mitigation

The severity, occurrence, and detection ratings are combined to create a Risk Priority Number (RPN). When that RPN exceeds the organization's risk threshold for Process FMEAs, a mitigation strategy is developed and implemented to lower the scores until the RPN is acceptable.

Download syllabus

Organization pricing Individual pricing

See what our customers are saying...